AEU2522 - CV Joint – 23 Spline C-Side Panel During cranking the resistor is

During cranking the resistor is bypassed so the coil receives full battery voltage for a stronger starting spark

6L 6-cylinder engine fitted to Series II

A gasket-only kit is also available separately for minor work

collecting swarf and metal debris that would otherwise continue to circulate through the assembly

AEU2522 - CV Joint – 23 Spline C-Side Panel During cranking the resistor isCV Joint (constant velocity joint) sits at the outer end of the front halfshaft, within the swivel housing of the front axle. It transmits drive from the halfshaft to the stub axle while allowing the front wheel to turn through its steering angle, holding a constant rotational speed across the joint. This is the early type with 23 internal splines on the halfshaft end. Pack the joint with the correct grade of grease on assembly and renew the swivel